TOOLS

MOTOR HANGAR - CLAMP ON

Convenient for suspending Flexible Shaft Power Tool motor unit above the workbench.Clamp-on mount...

Convenient for suspending Flexible Shaft Power Tool motor unit above the workbench.Clamp-on mount with 2" (51 mm) jaw capacity attaches to horizontal surface.Includes with handpiece rest.

TAP ASSORTMENT - ALL METRIC SIZES

This set of 9 taps will cover all ofthe most common metric sizes used in band instruments. Includ...

This set of 9 taps will cover all ofthe most common metric sizes used in band instruments. Includes one each of thefollowing mm sizes: 1.7 x 0.35 2.5 x 0.45 3.5 x 0.60 2.0 x 0.40 3.0 x 0.50 4.0 x 0.70 2.3 x 0.40 3.0 x 0.60 4.0 x 0.75 * General Purpose Plug Taps* High Carbon Steel* Metric Thread Sizes

MIGHTY MITE II VISE MOUNT PLATE - CLEARANCE

** CLEARANCE ITEM ** This mounting plate is designed to attach to the base of our Mighty Mite II ...

** CLEARANCE ITEM ** This mounting plate is designed to attach to the base of our Mighty Mite II Mandrel Vise so that the vise can be held in a standard flat jaw bench vise. Useful for shops with limited space, or that may have an existing standard vise on a floor mounted vise stand and wish to utilize the benefits of a mandrel vise. Plate is 3/8" (9.5mm) thick and matches the profile of the vise base. Solid steel 1 1/4" (32mm) square bar is welded to the plate bottom. Durable powder coat f...

WIHA SLOTTED SCREWDRIVER - MEDIUM - 2.5mm x 50mm

SPECIFICATIONS: tip width: medium / 0.098" (2.5mm) blade length: 2.0" (50mm) overall length...

SPECIFICATIONS: tip width: medium / 0.098" (2.5mm) blade length: 2.0" (50mm) overall length: 5.7" (145mm) RECOMMENDED USE: screw type: pivot, long (hinge), and medium key adjustment screws instrument: Flute, Clarinet, Oboe, Piccolo, Bassoon, Saxophone Votaw Tool Company is pleased to offer the Wiha? line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha? and are salt-bath hardened and tempered to provide optimum hardn...

PRECISION RULE - 1/32", 1/16", 1mm

Precision stainless steel rule.SPECIFICATIONS: length: 6" (150mm) width: 3/4" (19mm) graduation: ...

Precision stainless steel rule.SPECIFICATIONS: length: 6" (150mm) width: 3/4" (19mm) graduation: edge A: 1.0mm edge B: 1/32", 1/16"

WIHA SLOTTED SCREWDRIVER - SET OF 4 - X-LARGE

Set contains one each of all four x-large slotted screwdrivers.Votaw Tool Company is pleased to o...

Set contains one each of all four x-large slotted screwdrivers.Votaw Tool Company is pleased to offer the Wiha™ line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha™ and are salt-bath hardened and tempered to provide optimum hardness, maximum torque transfer and exceptional durability. Chrome plating assures protection against rust and corrosion.All Wiha™ handles are molded from durable, high impact black cellulose acetate and their conto...

DENT ROD ELBOW 3/8-16 - 30 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3/8-16 thread size and use dent balls with same thread.

DENT ROD ELBOW 3/8-16 - SET OF 4

Set contains 1 each of all sizes of our 3/8-16 Thread Size Dent Rod Elbows:#2309 Dent R...

Set contains 1 each of all sizes of our 3/8-16 Thread Size Dent Rod Elbows:#2309 Dent Rod Elbow - 30°#2310 Dent Rod Elbow - 45°#2311 Dent Rod Elbow - 65°#2312 Dent Rod Elbow - 90°

REPLACEMENT CENTER TENON - BUNDY / SELMER

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both...

Our pre-cut Replacement Tenons are precision machined from ABS plastic and designed to match both the bore size and corresponding receiver of many popular Bb clarinet models. If you currently do your own tenon repairs, these tenons will greatly speed up the job at a very reasonable price. Simply counterbore body and glue in tenon (we recommend our #3212 extra thick cyanoacrylate with #3213 accelerator). Bore surface may need to be slightly smoothed or feathered in. Dimensions:A: 0.613" (15.57...

LEAK TEST PLUG SET - FLUTE

Set contains two tapered rubber stoppers for checking for leaks in soprano flute.Put solid stoppe...

Set contains two tapered rubber stoppers for checking for leaks in soprano flute.Put solid stopper in one end of body joint and stopper with hole in opposite end. Check for leaks by closing keys and blowing in stopper with hole.

BALL PEEN BRASS HAMMER - SMALL

Our #2122 Brass Ball Peen Hammer is designed for light duty general purpose shop use. Head is mac...

Our #2122 Brass Ball Peen Hammer is designed for light duty general purpose shop use. Head is machined from half hard brass and fitted to a non-corrosive aircraft quality aluminum shaft with a nicely profiled Delrin handle.Specifications: overall length: 10" (25cm) head length: 2" (51mm) head diameter: 0.5" (12.7mm) overall weight: 4.4 oz. (124 gr)

WIHA SLOTTED SCREWDRIVER - LARGE - 3.0mm x 150mm

SPECIFICATIONS: tip width: large / 0.118" (3.0mm) blade length: 6.0" (150mm) overall length...

SPECIFICATIONS: tip width: large / 0.118" (3.0mm) blade length: 6.0" (150mm) overall length: 10.2" (260mm) RECOMMENDED USE: screw type: pivot, long (hinge), key guard, and large key adjustment screws instrument: Saxophone, Bassoon Votaw Tool Company is pleased to offer the Wiha™ line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha™ and are salt-bath hardened and tempered to provide optimum hardness, maximum torque t...

TUNGSTEN CARBIDE BUR - TAPER

Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...

Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.5" (12.7 mm) Head Width: 0.25" (6.35 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...