It appears that your cart is currently empty
Order online or call us 888-922-6030
TOOLS
DENT ROD ELBOW 3/8-16 - 45 DEGREE
Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing...
Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Great for sax bow work. Designed to screw onto dent rod with 3/8-16 thread size and use dent balls with same thread.
$10.00
Product SKU:
2310
Our #2242 Titan Dent Roller is designed for rolling out dents in medium and large sized bells inc...
Our #2242 Titan Dent Roller is designed for rolling out dents in medium and large sized bells including tuba, sousaphone, baritone/euphonium and large bore marching horns. Made from precision stainless steel tubing, the roller is centerless ground and polished and then fitted to a hefty 0.750" (19.05mm) vise mount shaft using two precision roller bearings to allow for smooth rolling action. The leading end of the roller is fitted with a radiused ABS plastic nose, eliminating any sharp edges.S...
$295.00
Product SKU:
2242
*DISCONTINUED*
Our Wood Flex Trombone Mandrel offers a real improvement over conventional type table leg ...
Our Wood Flex Trombone Mandrel offers a real improvement over conventional type table leg sticks. Used for holding instruments for all types of repairs, our mandrels are machine tapered from hardwood and then cut and quartered through the length of the tapered section.This unique design allows the sides of the mandrel to flex as the mandrel comes into contact with the inside of the instrument bell, and thus provides more contact area between the bell ...
$69.00
Product SKU:
2236
*DISCONTINUED*
WOOD FLEX MANDREL - TRUMPET / CORNET
Our Wood Flex Trumpet Mandrel offers a real improvement over conventional type tab...
Our Wood Flex Trumpet Mandrel offers a real improvement over conventional type table leg sticks. Used for holding instruments for all types of repairs, our mandrels are machine tapered from hardwood and then cut and quartered through the length of the tapered section.This unique design allows the sides of the mandrel to flex as the mandrel comes into contact with the inside of the instrument bell, and thus provides more contact area between th...
$65.00
Product SKU:
2235
Our Tri-Axial Vise Base is designed to offer ultimate versatility to our #2227 Votaw Mandrel Vise...
Our Tri-Axial Vise Base is designed to offer ultimate versatility to our #2227 Votaw Mandrel Vise or our #2465 Mighty Mite II Mandrel Vise (vises sold separately), and provides a means of holding instruments that brings a new standard to instrument repair. Whether you use a mandrel for holding instruments or one of our Horn Discs the base's three axis movement allows for quick, easy, and virtually unlimited positioning. As shown in illustration at right two levers control the following positi...
$285.00
Product SKU:
2225
For clamping a tube in our #2227 Votaw Mandrel Vise we offer an aluminum 'V' block to be placed o...
For clamping a tube in our #2227 Votaw Mandrel Vise we offer an aluminum 'V' block to be placed over the top of the tube. Helps distribute the pressure from the vise screw and prevent crushing or distortion of the tube.
$3.50
Product SKU:
2222
PROFESSIONAL SOLDERING FIXTURE 3RD ARM ATTACHMENT
Our #2201 3rd Arm Attachment is designed for use with our #2200 Professional Soldering Fixture fo...
Our #2201 3rd Arm Attachment is designed for use with our #2200 Professional Soldering Fixture for soldering applications that require athird clamp. Easily attaches to either the main arm or the upright base support.
$222.00
Product SKU:
2201
*DISCONTINUED*
PROFESSIONAL SOLDERING FIXTURE
Our Professional Soldering Fixture is the finest available. Constructed from a combination of sta...
Our Professional Soldering Fixture is the finest available. Constructed from a combination of stainless steel and quality 6061 T6 aluminum, our fixture is precision designed and machined, surpassing any other on the market.This unique design provides for quick, solid setup and clamping. As shown at right, Screw 'A' sets jaw opening and Knob 'B' provides positive lock down, clamping the part tight.The unique positioning joints allow quick, easy setup and positive, solid lock down. Bump or move...
$462.00
Product SKU:
2200
CURVED 18" DENT ROD - MEDIUM BEND
Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall dia...
Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diameter: 0.5" (12.7mm) both ends taper to 0.375" (9.52mm) Overall length approximately 18" (45.7cm) Both ends threaded 3/8"-16
$48.00
Product SKU:
2305
CURVED 18" DENT ROD - SLIGHT BEND
Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall dia...
Machined from rust free 303 stainless steel Works great on sax necks, crooks, etc. Overall diameter: 0.5" (12.7mm) both ends taper to 0.375" (9.52mm) Overall length approximately 18" (45.7cm) Both ends threaded 3/8"-16
$48.00
Product SKU:
2304
STANDARD DENT ROD - 3/4" (19.05mm) - STAINLESS ...
Machined from rust-free stainless steel, our standard 3/4" (19.05mm) diameter dent rod is tapered...
Machined from rust-free stainless steel, our standard 3/4" (19.05mm) diameter dent rod is tapered at one end and fitted with 3/8-16 threads. The other end is fitted with 1/2-13 threads. The 48" (1.22m) length works great for all saxophones as well as large brass instrument.Rather than simply thread the ends of the rods we have fitted each end with case hardened threaded inserts. Should the threads ever become damaged or break a new insert can be easily and inexpensively installed rather than ...
$76.40
Product SKU:
2301
STANDARD DENT ROD - 3/4" (19.05mm) - STEEL
Our standard 3/4" (19.05mm) diameter steel dent rod is tapered at one end and fitted with 3/8-16 ...
Our standard 3/4" (19.05mm) diameter steel dent rod is tapered at one end and fitted with 3/8-16 threads. The other end is fitted with 1/2-13 threads. The 48" (1.22m) length works great for all saxophones as well as large brass instrument.Rather than simply thread the ends of the rods we have fitted each end with case hardened threaded inserts. Should the threads ever become damaged or break a new insert can be easily and inexpensively installed rather than having to replace the entire rod.Ov...
$58.92
Product SKU:
2300
Our #2115 Flute Polishing Fixture is designed to securely hold a flute main body or foot section ...
Our #2115 Flute Polishing Fixture is designed to securely hold a flute main body or foot section while polishing.The unique design safely supports the instrument in any position.Re-adjustment and rotation is fast and easy.A real time saver. Built from durable, non-corrosive materials.
$58.75
Product SKU:
2115
Designed to safely bend and center the ring key over the tone hole. Precision machined from non-c...
Designed to safely bend and center the ring key over the tone hole. Precision machined from non-corrosive aluminum and stainless steel, this tool will work on all Bb soprano clarinets. Will not mar key finish or chip tone hole chimney.
$25.00
Product SKU:
2676