It appears that your cart is currently empty
Order online or call us 888-922-6030
TOOLS
Built from solid oak hard wood this stand is designed to hold all nine roller and cone components...
Built from solid oak hard wood this stand is designed to hold all nine roller and cone components from our modular dent roller system.Measures 14" (36cm) square and 1-1/2" (38mm) thick.When ordering our #2270 MODULAR DENT ROLLER COMPLETE SYSTEM - COMLETE the stand is included free.See all Modular Roller Dent Roller System Components About our Modular Dent Roller System
$50.00
Product SKU:
2274
Each brush has an overall length of 15" (38.1cm) and is made with twisted galvanized wire and inc...
Each brush has an overall length of 15" (38.1cm) and is made with twisted galvanized wire and includes a loop end. Flexible nylon bristles are safe to instrument while still providing thorough cleaning. Sold individually or in a set of 8. Work great for the following applications: brass instruments tuning slides mouthpipes valve casings bell pipes woodwind instruments tone holes instrument bore
$2.79
Product SKU:
These German made snips are designed with a superior cutting action that is tough enough to easil...
These German made snips are designed with a superior cutting action that is tough enough to easily cut through a penny and precise enough to shave off a ribbon of paper. Perfect for cutting and trimming patches or for general shop use.Spring action handle with lock.Overall length 7 1/2" (19.05cm).
$13.42
Product SKU:
6755
*DISCONTINUED*
Add more workbench area with our Pull-Away Work Tray. A great addition to any shop, use it by the...
Add more workbench area with our Pull-Away Work Tray. A great addition to any shop, use it by the woodwind or brass bench for setting keys, valve parts, slides, etc. out of the way while cleaning or doing other repairs to the body. Provides an additional 204 square inches (1333 sq cm) of convenient work area that can be pushed out of the way off to the side or under the work bench.FEATURES INCLUDE: heavy gauge aluminum tray measuring 12" x 17" (31cm x 43cm) with a 3/4" (19.05mm) edge lip two ...
$85.00
Product SKU:
6700
Our carbide cutting burs are used for general all purpose cutting in theshop. From grinding off c...
Our carbide cutting burs are used for general all purpose cutting in theshop. From grinding off case rivets to brass repair, these cutters work quicklyand smoothly on most ferrous and non-ferrous metals including stainless steel,steel alloys, cast iron, etc.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.25" (6.35 mm) Head Width: 0.25" (6.35 mm) Shaft Lengt...
$26.00
Product SKU:
6625
REPLACEMENT OUTER SHEATH - NEOPRENE
Outer neoprene rubber replacementsheath for: #6519 or #6519A Flexible Shaft Power Tool #6520 or #...
Outer neoprene rubber replacementsheath for: #6519 or #6519A Flexible Shaft Power Tool #6520 or #6520A Flexible Shaft Power Tool Any Foredom Series S, CC, R, SR, or L motors Caution: the neoprene sheath is moreflexible than the standard, and there is more risk of breaking the inner shaft from too tight a bend.
$14.00
Product SKU:
6528
REPLACEMENT OUTER SHEATH - STANDARD
Standard outer rubber replacementsheathing for: #6519 or #6519A Flexible Shaft Power Tool #6520 o...
Standard outer rubber replacementsheathing for: #6519 or #6519A Flexible Shaft Power Tool #6520 or #6520A Flexible Shaft Power Tool Any Foredom Series S, CC, or R motors
$13.00
Product SKU:
6527
*DISCONTINUED BY MFR.*
For use with collet style handpiece.
For use with collet style handpiece.
$3.50
Product SKU:
6522
Pair of motor brushes for our #6519Foredom Power Tool or #6520Foredom Power Tool(110 volt only)Al...
Pair of motor brushes for our #6519Foredom Power Tool or #6520Foredom Power Tool(110 volt only)Also work on any Foredom CC, DD, MM series motors (110 volt only)For 220 volt motors see #6521BMotor Brushes.
$8.50
Product SKU:
6521A
Maintenance kit for Foredom Power Tools.Includes: Replacement Inner Shaft Pair of motor brushes G...
Maintenance kit for Foredom Power Tools.Includes: Replacement Inner Shaft Pair of motor brushes Grease Operating Manual Works in any of the following: #6519 Flexible Shaft Power Tool #6520 Flexible Shaft Power Tool Any Foredom Series CC, DD, or MM motors (110 volts)
$17.85
Product SKU:
6521
FOREDOM POWER TOOL WITH CHUCK HANDPIECE
Foredom® Flexible Shaft Power Tools are of the highest qualityand have been the standard in preci...
Foredom® Flexible Shaft Power Tools are of the highest qualityand have been the standard in precision industries for many years. Designed withpowerful 1/8 HP ball bearing motors for all types of hand grinding, deburring,buffing or polishing.Smooth running handpieces have a slim, lightweight design and eliminate thevibration, noise and heat associated with motors in other hand held electric orair tools.Features a 1/8 HP, ball bearing, reversible motor with dependable, long lasting performance ...
$381.34
Product SKU:
6519
Handpiece constructed with pre-lubricated ball bearings that require no maintenance. Collet desig...
Handpiece constructed with pre-lubricated ball bearings that require no maintenance. Collet design works best for using cutting burs, wheels and buffs.Comes with wrench and 3 different size collets for holding the following shaftsizes:3/32" (2.38mm)......1/8" (3.17mm) ......1/4" (6.35mm)Handpiece overalllength: 5.6" (14.2cm)Handpiece diameter: 1.0" (25.4mm)Handpiece weight: 5.9 oz (167 g)Easily attaches with quick disconnect to any Foredom Flexible Shaft Power Tool.
$78.64
Product SKU:
6511
*DISCONTINUED*
MAGNETIC DENT REMOVAL MUSHROOM - 2.0" (50.8mm)
Designed for use with magnetic dent removal tools, these discs attach to the end of the magnet to...
Designed for use with magnetic dent removal tools, these discs attach to the end of the magnet to provide a radiused surface.Precision machined steel.Diameter: 2.0" (50.8mm)
$15.00
Product SKU:
2507
MAGNETIC DENT REMOVAL MUSHROOM - 1.625" (41.3mm)
Designed for use with magnetic dent removal tools,these discs attach to the end of the magnet to ...
Designed for use with magnetic dent removal tools,these discs attach to the end of the magnet to provide a radiused surface.Precision machined steel.Diameter: 1.625" (41.3mm)
$15.00
Product SKU:
2506
Precision stainless steel rule. Includes pocket clip thatfunctions as depth or height gauge. Back...
Precision stainless steel rule. Includes pocket clip thatfunctions as depth or height gauge. Back side lists fractional to decimal equivalents.SPECIFICATIONS: length: 6" (150mm) width: 15/32" (12mm) graduation: edge A: 1/32" edge B: 1/64"
$3.18
Product SKU:
2804
*DISCONTINUED*
PILOT BUSHING - CENTER TENON - VITO
Designed to work on Vito Bb soprano plastic clarinet upper joints when counterboring for center t...
Designed to work on Vito Bb soprano plastic clarinet upper joints when counterboring for center tenon replacement.Machined from high density plastic with 3/16" (4.76mm) diameter pilot hole.Outside diameter: 0.584" (14.8mm). TenonReplacement Helpful Tips TenonReplacement Tooling
$12.00
Product SKU:
3564
*DISCONTINUED*
PILOT BUSHING - CENTER TENON - ARTLEY
Designed to work on Artley Bb soprano plastic clarinet upper joints when counterboring for center...
Designed to work on Artley Bb soprano plastic clarinet upper joints when counterboring for center tenon replacement. Machined from high density plastic with 3/16" (4.76mm) diameter pilot hole. Outside diameter: 0.572" (14.5mm).
$12.00
Product SKU:
3563
BEARING MODULE RETAINING NUT (REPLACEMENT)
Replacement retaining nut for #2251N Bearing Module
Replacement retaining nut for #2251N Bearing Module
$2.00
Product SKU:
2251N-RN
Our clarinet pad slick is made from non-corrosive, spring temper, stainless steel. Handy tool for...
Our clarinet pad slick is made from non-corrosive, spring temper, stainless steel. Handy tool for all pad leveling and adjustment on clarinet, oboe, flute, and piccolo. Includes notch for fork key cork installation.Thickness: 0.031" (0.79mm) Overall Length: 3" (76mm)
$4.50
Product SKU:
2368
*DISCONTINUED*
Our #2391 Disc Sander is designed to trim and square up the ends of key hinges, hinge rods (long ...
Our #2391 Disc Sander is designed to trim and square up the ends of key hinges, hinge rods (long screws), slide pipes, brass tube, etc. Designed for fast setup, simply clamp bottom recessed area of chassis into standard bench vise and sander is ready to use.For hinge rods and tubing, use any of the four different sized 'V' slots located on the carriage top. To accommodate various key shapes, position one or both key saddles into the desired carriage holes to support the key hinge. Bring end t...
$125.00
Product SKU:
2391