TOOLS

JEWELERS SAW BLADES

High grade steel and electronically controlled tempering provide long life blades that are less p...

High grade steel and electronically controlled tempering provide long life blades that are less prone to breakage.German made. Sold in packages of 12.Lower blade number indicates smaller teeth and finer cut.

MIGHTY MITE II VISE MOUNT PLATE - CLEARANCE

** CLEARANCE ITEM ** This mounting plate is designed to attach to the base of our Mighty Mite II ...

** CLEARANCE ITEM ** This mounting plate is designed to attach to the base of our Mighty Mite II Mandrel Vise so that the vise can be held in a standard flat jaw bench vise. Useful for shops with limited space, or that may have an existing standard vise on a floor mounted vise stand and wish to utilize the benefits of a mandrel vise. Plate is 3/8" (9.5mm) thick and matches the profile of the vise base. Solid steel 1 1/4" (32mm) square bar is welded to the plate bottom. Durable powder coat f...

DENT ROD ELBOW 1/4-28 - 65 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the an...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Designed to screw onto dent rod with 1/4-28 thread size and use dent balls with same thread.

DENT ROD ELBOW 1/4-28 - 30 DEGREE

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the an...

Our Dent Rod Elbows are designed to work as extensions on a standard dent rod for changing the angle and position of the dent ball. Designed to screw onto dent rod with 1/4-28 thread size and use dent balls with same thread.

CARBIDE BUR - INVERTED CONE

Our carbide cutting burs are used for general all purpose cutting in the shop. From grinding off ...

Our carbide cutting burs are used for general all purpose cutting in the shop. From grinding off case rivets to brass repair, these cutters work quickly and smoothly on most ferrous and non-ferrous metals including stainless steel, steel alloys, cast iron, etc. Standard 1/8" (3.175 mm) diameter shaft will work in all of our Foredom Handheld Power Tools or any high speed hand tool. Maximum speed rating 35,000 rpm.Cutter Dimensions: Head Length: 0.25" (6.35 mm) Head Width: 0.25" (6.35 mm) Shaft...

TUNGSTEN CARBIDE BUR - SET OF 5

Unique structurally aligned tungsten carbide pointsleave a smootherfinish than our standard carbi...

Unique structurally aligned tungsten carbide pointsleave a smootherfinish than our standard carbide burs. Work great for removing solder andcorrosion from brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Set of 5 includes 1 each of the following: click on picture for individual specifications Ball Nose Cylinder Sphere Taper ...

HANDPIECE HOLDER

This 'third hand' device clamps to theworkbench allowing operator to bring work to the tool.Handp...

This 'third hand' device clamps to theworkbench allowing operator to bring work to the tool.Handpiece quickly clamps into holder for stationary operation.Unit clamps to workbench up to 1 3/4" (45 mm) thick.Adjustable height up to 10" (26 cm).Works with either chuck or collet style handpiece.

REPLACEMENT INNER SHAFT

Works in any of the following: #6519 or #6519A Flexible Shaft Power Tool #6520 or #6520A Flexible...

Works in any of the following: #6519 or #6519A Flexible Shaft Power Tool #6520 or #6520A Flexible Shaft Power Tool Any Foredom Series S, CC, R, SR, or L motors

INCANDESCENT LAMP - WEDGE STYLE BASE

Incandescent lamp with wedge style base for use on old style #8104 (discontinued) cord, plug, and...

Incandescent lamp with wedge style base for use on old style #8104 (discontinued) cord, plug, and jack. Rated 6.3 volt.

PRECISION RULE - 1/64", 1mm

Precision stainless steel rule. Includes pocket clip thatfunctions as depth or height gauge. Back...

Precision stainless steel rule. Includes pocket clip thatfunctions as depth or height gauge. Back side lists fractional to decimal equivalents.SPECIFICATIONS: length: 6" (150mm) width: 15/32" (12mm) graduation: edge A: 1/64" edge B: 1.0mm

WIHA SLOTTED SCREWDRIVER - X-LARGE - 4.0mm x 60mm

SPECIFICATIONS: tip width: x-large / 0.157" (4.0mm) blade length: 2.4" (60mm) overall lengt...

SPECIFICATIONS: tip width: x-large / 0.157" (4.0mm) blade length: 2.4" (60mm) overall length: 6.7" (170mm) RECOMMENDED USE: screw type: pivot, key guard, valve, and miscellaneous screws instrument: Saxophone, French Horn and miscellaneous brass valve sections Votaw Tool Company is pleased to offer the Wiha? line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha? and are salt-bath hardened and tempered to provide optim...

WIHA SLOTTED SCREWDRIVER - X-LARGE - 3.5mm x 60mm

SPECIFICATIONS: tip width: x-large / 0.140" (3.5mm) blade length: 2.4" (60mm) overall lengt...

SPECIFICATIONS: tip width: x-large / 0.140" (3.5mm) blade length: 2.4" (60mm) overall length: 6.7" (170mm) RECOMMENDED USE: screw type: pivot and key guard screws instrument: Saxophone, Bassoon Votaw Tool Company is pleased to offer the Wiha? line of screw drivers. Blades are made of high alloy vanadium-molybdenum steel specially developed for Wiha? and are salt-bath hardened and tempered to provide optimum hardness, maximum torque transfer and exceptional durability. C...

RAWHIDE MALLET SET

Save 10% over individual price, this set of 6 malletscontains one each of: 4 Stand...

Save 10% over individual price, this set of 6 malletscontains one each of: 4 Standard WeightMallets#6772, #6773, #6774, #6775 2 Heavy Weight Mallets#6780 and #6781