It appears that your cart is currently empty
Order online or call us 800-894-8665
All
Made from precision ground drill rod, each finely polished mandrel holds a diameter and roundness...
Made from precision ground drill rod, each finely polished mandrel holds a diameter and roundness tolerance of +/- 0.0005" (0.0127mm), qualities that far surpass other mandrels on the market. All mandrels have a full radius machined and polished on one end to prevent snagging while inserting into badly dented slide pipes and to prevent putting ridges in the crook area. The mandrel's other end is number indexed for easy identification. Overall mandrel length is approximately 36" (91cm). Mandr...
$1,031.22
Product SKU:
2080
Designed for aligning both inner and outer slidepipes, our #2076 Leveling Block is constructed us...
Designed for aligning both inner and outer slidepipes, our #2076 Leveling Block is constructed using heavy plate glass enclosedin a wood case. Two steel riser blocks machined perfectly flat set on either endof the glass. Slide pipes are set on the riser blocks to determine skew ortwist. Works great for soldering and reassemby work. Whensoldering, simply position the area receiving the heat off of either end of theblock. To help hold pipes in place when soldering order our #2078 TROMBONE SLID...
$196.50
Product SKU:
2076
Our thanks to repair technician Ted McDowell for coming up with this clever idea for an easy to u...
Our thanks to repair technician Ted McDowell for coming up with this clever idea for an easy to use jig for holding trumpet, cornet, and other small bore brass instruments. Each side of block slides along the dovetail joint to easily adjust spacing between pegs to accomodate valve casing.Great for slide work, soldering, assembly, etc.Made from solid oak hardwood. Mounts in standard vise.Diameter of pegs: 5/8" (16mm).
$26.50
Product SKU:
2119
One piece Bb trumpet bell. Bore: 0.460" (11.68mm). Bell rim diameter: 4.75" (120mm). Overall l...
One piece Bb trumpet bell. Bore: 0.460" (11.68mm). Bell rim diameter: 4.75" (120mm). Overall length (bell rim to bow): 18.875" (479mm) Unfinished brass with no engraving. May have some small dents.
$231.00
Product SKU:
9640
TUBE BRUSH - NYLON - 1/4" (6.3mm)
Dimensions: overall length: 15" (38.1cm) brush length: 2" (51mm) brush diameter: 1/4" (6.35mm)...
Dimensions: overall length: 15" (38.1cm) brush length: 2" (51mm) brush diameter: 1/4" (6.35mm) Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made with nylon bristles.
$2.79
Product SKU:
3501
TUBE BRUSH - NYLON - 3/8" (9.5mm)
Dimensions: overall length: 15" (38.1cm) brush length: 2" (51mm) brush diameter: 3/8" (9.5mm) ...
Dimensions: overall length: 15" (38.1cm) brush length: 2" (51mm) brush diameter: 3/8" (9.5mm) Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made with nylon bristles.
$2.49
Product SKU:
3502
TUBE BRUSH - NYLON - 1/2" (12.7mm)
Dimensions: overall length: 15" (38.1cm) brush length: 3" (76mm) brush diameter: 1/2" (12.7mm)...
Dimensions: overall length: 15" (38.1cm) brush length: 3" (76mm) brush diameter: 1/2" (12.7mm) Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made with nylon bristles.
$3.48
Product SKU:
3503
TUBE BRUSH - NYLON - 5/8" (15.9mm)
Dimensions: overall length: 15" (38.1cm) brush length: 3" (76mm) brush diameter: 5/8" (15.9mm)...
Dimensions: overall length: 15" (38.1cm) brush length: 3" (76mm) brush diameter: 5/8" (15.9mm) Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made with nylon bristles.
$2.82
Product SKU:
3504
TUBE BRUSH - NYLON - 3/4" (19.1mm)
Dimensions: overall length: 15" (38.1cm) brush length: 3" (76mm) brush diameter: 3/4" (19.1mm)...
Dimensions: overall length: 15" (38.1cm) brush length: 3" (76mm) brush diameter: 3/4" (19.1mm) Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made with nylon bristles.
$2.70
Product SKU:
3505
TUBE BRUSH - NYLON - 1" (25.4mm)
Dimensions: overall length: 15" (38.1cm) brush length: 4" (102mm) brush diameter...
Dimensions: overall length: 15" (38.1cm) brush length: 4" (102mm) brush diameter: 1" (25.4mm) Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made with nylon bristles.
$3.63
Product SKU:
3506
TUBE BRUSH - NYLON - 1 1/4" (31.7mm)
Dimensions: overall length: 15" (38.1cm) brush length: 4" (102mm) brush diameter: 1 1/4" (31.8...
Dimensions: overall length: 15" (38.1cm) brush length: 4" (102mm) brush diameter: 1 1/4" (31.8mm) Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made with nylon bristles.
$3.33
Product SKU:
3507
TUBE BRUSH - NYLON - 1 1/2" (38.1mm)
Dimensions: overall length: 15" (38.1cm) brush length: 4" (102mm) brush diameter: 1 1/2" (38.1...
Dimensions: overall length: 15" (38.1cm) brush length: 4" (102mm) brush diameter: 1 1/2" (38.1mm) Stem is constructed using twisted, galvanized, rust free wire with a loop end. Brush part made with nylon bristles.
$4.53
Product SKU:
3508
Each brush has an overall length of 15" (38.1cm) and is made with twisted galvanized wire and inc...
Each brush has an overall length of 15" (38.1cm) and is made with twisted galvanized wire and includes a loop end. Flexible nylon bristles are safe to instrument while still providing thorough cleaning. Sold individually or in a set of 8. Work great for the following applications: brass instruments tuning slides mouthpipes valve casings bell pipes woodwind instruments tone holes instrument bore
$2.79
Product SKU:
TUNGSTEN CARBIDE BUR - SET OF 5
Unique structurally aligned tungsten carbide pointsleave a smootherfinish than our standard carbi...
Unique structurally aligned tungsten carbide pointsleave a smootherfinish than our standard carbide burs. Work great for removing solder andcorrosion from brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Set of 5 includes 1 each of the following: click on picture for individual specifications Ball Nose Cylinder Sphere Taper ...
$80.00
Product SKU:
6600
TUNGSTEN CARBIDE BUR - BALL NOSE
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.5" (12.7 mm) Head Width: 0.25" (6.35 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...
$26.23
Product SKU:
6601
TUNGSTEN CARBIDE BUR - CYLINDER
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.5" (12.7 mm) Head Width: 0.25" (6.35 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...
$26.23
Product SKU:
6602
TUNGSTEN CARBIDE BUR - ROTOR SAW
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.187" (4.76 mm) Head Width: 0.687" (17.46 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...
$26.23
Product SKU:
6605
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.437" (11.11 mm) Head Width: 0.437" (11.11 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...
$26.23
Product SKU:
6603
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carb...
Unique structurally aligned tungsten carbide points leave a smoother finishthan our standard carbide burs. Work great for removing solder and corrosionfrom brass pipes and other fine cutting applications.Standard 1/8" (3.175 mm) diameter shaft will work in all of our ForedomHandheld Power Tools or any high speed hand tool. Maximum speed rating 35,000rpm.Cutter Dimensions: Head Length: 0.5" (12.7 mm) Head Width: 0.25" (6.35 mm) Shaft Length: 1" (25.4 mm) Shaft Diameter: 0.125" (3.175 mm) ...
$16.00
Product SKU:
6604
TUNING BIT - CONN, KING & OTHERS
Fits Conn 20K, King models before 1985, Pan American, most Buescher, and many other Eb sousaphone...
Fits Conn 20K, King models before 1985, Pan American, most Buescher, and many other Eb sousaphones. Sold by each - note that the instrument requires two bits.
$84.00
Product SKU:
9604